A WIDE VARIETY OF FLOW CAPACITIES AND CONTAINMENT HOLDING CAPABILITIES
Standard Features & Benefits
- Full flow filtration at a reasonable cost
- Sentinal pressure Drop Alert System
- Stainless steel heavy-duty baskets
- Low pressure drop
- Permanently-piped housing are opened without tools and without disturbing the piping
- Machined cover gasket groove provides positive sealing
- Adjustable-height tripod legs
- Easy Cleanability
- Conserves water
- Reduces plant down time
OPTIONAL FEATURE: Complete standby filtration system with automatic actuator controls.
 |
Dual Purpose Units
Any of the Progressive models shown can serve either as a strainer, a bag filter, or
(in models that can be used with the inner basket/inner bag option) as hybrid combinations of strainers and filters.
The function can be changed at any time, without modification to the housing. Housings are available in carbon steel
and stainless steel (304 or 316).
|  |
Straining
As strainers, the housings are fitted with perforated stainless steel baskets. Perforation size can be from 1/16 to 1/4 –inch. When filtering is required, strainer baskets can be ordered with stainless steel wire mesh linings. Mesh sized offered range from 20 to 200.
Filtering
When the application calls for the finer filtration (or when there is reason to use disposable elements) filter bags can be used, supported by stainless steel baskets with 9/16-inch dia. Perforations. Bags are made with particle size retention ratings ranging from 800 down to one micron.
Standard bag materials are nylon, polyester and polypropylene, constructed as felts and monofilament or multifilament meshes. Special purpose felt bags include high temperature service (to 500o F) bags of nylon or Teflon and Oil-adsord bags made of special felted polypropylene microfibers
 |
Single Basket / Bag Design
For flow rates from 50 to 200 gpm
- Delivers two to four square feet of basket or bag surface areas without need for ASME code construction
- Pipe sizes 1,2 or 3-inch, NPT or flanged
- Basket depth – 15 inches or 30 inches
- Pressure rating: 150 psi (with eyenut cover)
- Side or bottom outlet
- Most versatile of the single basket/bag series
- Inner basket of bag option available
- ASME code stamp available
Multibasket / Multibag Design
For flow rates from 400 to 2000 gpm
- Inner basket or bag option available
- ASME code stamp available
- In-line connections
- Model PF 16 - Holds 2 basket/bags. Flows to 400 gpm. Pipe size 2, 3, 4-inch,. flanged.
- Model PF 18 - Holds 3 baskets/bags. Flows to 600 gpm. Pipe size 2, 3, 4-inch, flanged.
- Model PF 22 - Holds 4 baskets/bags. Flows to 800 gpm. Pipe size 2, 3, 4-inch, flanged.
- Model PF24 - Holds 6 baskets/bags. Flows to 1200 gpm. Pipe sizes 3, 4, 6-inch, flanged.
- Model PF30 - Holds 8 baskets/bags. Flows to 1600 gpm. Pipe sizes 4, 6, 8-inch, flanged.
- odel PF36 - Holds 12 baskets/bags. Flows to 2000 gpm. Pipe sizes 6, 8, 10-inch, flanged
|
Filter Specifications
Click on a link below to take you to the information:
PF 10-50 gpm
PF 12-100 gpm
PF 14-100 gpm
PF 16-32-400-2000 gpm
Model PF 10 - 50 gpm
Progressive's Model PF 10 Single Series of Liquid Bag Housings offer two depths, a 6" and a 12" housing depending upon the needed surface area and volume of fluid to be filtered.
Features
- Carbon, 304, or 316 stainless ateel material
- 300 PSI pressure rating
- Low pressure drop
- Quick swing closure with eye nuts
- Viton lid seal
- Differential, drain, and vent ports
- Adjustable support legs
- 316 stainless steel strainer basket
- 2-part epoxy finish on carbon vessels
Options
- Adjustable support legs
- 500 PSI pressure rating
- Mesh lined strainer baskets
Our PF 10 series effectively removes dirt, pipe scale, and other contaminants from process liquids such as water, chemical, and petroleum products. Quality construction and design assure protection or all down-stream equipment.
Vessel Construction
Our model PF 10 single vessels are designed for operation up to 300 PSI at 300 degrees Fahrenheit. The housing design provides a large sump area at the bottom of the basket for particulate accumulation. This design utilized the filter more efficiently and prolongs the element life.
The 316 S.S. basket seals onto a viton o-ring to eliminate particulate bypass between the basket and seat. Optional mesh-lined strainer baskets and o-rings are available. Please refer to their individual brochures in our liquid catalog.
A vent in the housing lid and a drain port in the housing speed evacuation and filling. Gauge ports are located on the body of the housing to install gauges for monitoring the differential pressure across the bag.. Permanently piped housing are opened with simple tools without disturbing the piping. Swing bolts with eye-nuts allow easy opening and closing of the swing-lid. No need to remove ay hardware.
As a standard finish, all vessels are blast cleaned and painted inside and out with a 2-part epoxy. Stainless steel vessels are supplied with a satin finish.
Housing Operations
Unfiltered liquid enters the housing above the filter bag or strainer basket; flows down into the housing; and continues through the element. Solids are trapped inside the filter bag or strainer and easily removed when the housing is serviced.
Specifications
Housing lid has a 3-bolt swing closure with a vent port. Connections are (_) inch (NPT)(FLG) with a (side inlet and bottom outlet)(side inlet and side outlet)(side inlet and 90 degree bottom outlet). Housing is supplied with two differential pressure ports to measure the differential pressure across the filter bag. A two-part epoxy finish. Basket material is manufactured from 316 stainless steel with 9/64" perforations to act as a strainer or to accept a #3 or #4 size liquid bag. Lid seals onto a Viton o-ring. Vessels are rated at a 300 pound per square inch design.
Model PF 12 - 100 gpm
Progressive's Model PF 12 Single Series of Liquid Bag Housing offer two depths, and 18" and a 30" housing depending upon the needed surface area and volume of fluid to be filtered.
Features
- Carbon, 304, or 316 stainless ateel material
- 150 PSI pressure rating
- Low pressure drop
- Quick swing closure with eye nuts
- Viton seals - lid and basket
- Differential, drain, and vent ports
- Adjustable support legs
- 316 stainless steel strainer basket
- 2-part epoxy finish on carbon vessels
Our PF series effectively removes dirt, pipe scale, and other contaminants from process liquids such as water, chemical, and petroleum products. Quality construction and design assure protection for all down-stream equipment.
Vessel Construction
Our model PF 12 single vessels are designed for operation up to 150 PSI at 300 degrees Fahrenheit. The housing design provides a large sump area at the bottom of the basket for particulate accumulation. This design utilized the filter more efficiently and prolongs the element life.
The 316 S.S. basket seals onto a viton o-ring to eliminate particulate bypass between the basket and seat. Optional mesh-lined strainer baskets and o-rings are available. Please refer to the individual brochures in our liquid catalog.
A vent in the housing lid and a drain port in the housing speed evacuation and filling. Gauge ports are located on the body of the housing to install gauges for monitoring the differential pressure across the bag.. Permanently piped housing are opened with simple tools without disturbing the piping. Swing bolts with eye-nuts allow easy opening and closing of the swing-lid. No need to remove any hardware. As a standard finish, all vessels are blast cleaned and painted inside and out with a 2-part epoxy. Stainless steel vessels are supplied with a satin finish.
Housing Operations
Unfiltered liquid enters the housing above the filter bag or the strainer basket; flos down into the housing; and continues through the element. Solids are trapped inside the filter bag or strainer and easily removed when the housing is serviced. Our standard o-ring seal between the basket and the housing ensures a positive seal to prevent bypass.
Specifications
Housing lid has a 3-bolt swing closure with a vent port. Connections are (_) inch (NPT)(FLG) with a (side inlet and bottom outlet)(side inlet and side outlet)(side inlet and 90 degree bottom outlet). Housing is supplied with two differential pressure ports to measure the differential pressure across the filter bag. A two-part epoxy finish is applied on the carbon steel vessels to maximize the life of the housing; stainless steel vessels are supplied with a satin finish. Basket material is constructed of 316 stainless steel with 9/64” perforations to act as a strainer or to accept a #8 or #9 size liquid bag. Basket seals onto a Viton o-ring in the basket support. Adjustable tripod leg assembly is supplied with housing. Vessels are rated at a 150 pounds per square inch design.
Model PF 14 - 200 gpm
Progressive's Model PF 14 Single Series of Liquid Bag Housing offer two depths, and 15" and a 30" housing depending upon the needed surface area and volume of fluid to be filtered.
Features
- Carbon, 304, or 316 stainless ateel material
- 150 PSI pressure rating
- Low pressure drop
- Quick swing closure with eye nuts
- Viton seals - lid and basket
- Differential, drain, and vent ports
- Adjustable support legs
- 316 stainless steel strainer basket
- 2-part epoxy finish on carbon vessels
Our PF 14 series effectively removes dirt, pipe scale, and other contaminants from process liquids such as water,
chemical, and petroleum products. Quality construction and design assure protection for all down-stream equipment.
Vessel Construction
Our model PF 12 single vessels are designed for operation up to 150 PSI at 300 degrees Fahrenheit.
The housing design provides a large sump area at the bottom of the basket for particulate accumulation.
This design utilized the filter more efficiently and prolongs the element life.
The 316 S.S. basket seals onto a viton o-ring to eliminate particulate bypass between the basket and seat.
Optional mesh-lined strainer baskets and o-rings are available. Please refer to the individual brochures in our liquid catalog.
A vent in the housing lid and a drain port in the housing speed evacuation and filling. Gauge ports are located
on the body of the housing to install gauges for monitoring the differential pressure across the bag.
Permanently piped housing are opened with simple tools without disturbing the piping. Swing bolts with
eye-nuts allow easy opening and closing of the swing-lid. No need to remove any hardware.
As a standard
finish, all vessels are blast cleaned and painted inside and out with a 2-part epoxy. Stainless steel
vessels are supplied with a satin finish.
Housing Operations
Unfiltered liquid enters the housing above the filter bag or the strainer basket; flows down into the
housing; and continues through the element. Solids are trapped inside the filter bag or strainer and
easily removed when the housing is serviced. Our standard o-ring seal between the basket and the housing
ensures a positive seal to prevent bypass.
Model PF 16-32, 400-2000 gpm
Progressive's Multi-Round Series of Liquid Bag Housing range from our 2 basket to our 12 basket housing
design depending upon the needed surface area and volume of fluid to be filtered.
Features
- Carbon, 304, or 316 stainless ateel material
- 150 PSI pressure rating
- Low pressure drop
- Davit cover lift closure with swing bolts
- Buna seals - lid and basket
- Differential, drain, and vent ports
- Heavy-duty support legs
- 316 stainless steel strainer basket
- 2-part epoxy finish on carbon vessels
- Bearing assisted davit assembly
Our multi-round vessels effectively removes dirt, pipe scale, and other contaminants from process liquids such as water,
chemical, and petroleum products. Quality construction and design assure protection for all down-stream equipment.
Vessel Construction
Our multi-round vessels are designed for operation up to 150 PSI at 300 degrees Fahrenheit.
The housing design provides a large sump area at the bottom of the basket for particulate accumulation.
This design utilized the filter more efficiently and prolongs the element life.
The 316 S.S. basket seals onto a viton o-ring to eliminate particulate bypass between the basket and seat.
Optional mesh-lined strainer baskets and o-rings are available. Please refer to the individual brochures in our liquid catalog.
A vent in the housing lid and a drain port in the housing speed evacuation and filling. Gauge ports are located
on the body of the housing to install gauges for monitoring the differential pressure across the bag.
Permanently piped housing are opened with simple tools without disturbing the piping. Swing bolts with
eye-nuts allow easy opening and closing of the swing-lid. No need to remove any hardware.
As a standard
finish, all vessels are blast cleaned and painted inside and out with a 2-part epoxy. Stainless steel
vessels are supplied with a satin finish.
Housing Operations
Unfiltered liquid enters the housing above the filter bag or the strainer basket; flos down into the
housing; and continues through the element. Solids are trapped inside the filter bag or strainer and
easily removed when the housing is serviced. Our standard o-ring seal between the basket and the housing
ensures a positive seal to prevent bypass.
Specifications
Housing lid has a 3-bolt swing closure with a vent port. Connections are (_) inch (NPT)(FLG) with a
(side inlet and bottom outlet)(side inlet and side outlet)(side inlet and 90 degree bottom outlet).
Housing is supplied with two differential pressure ports to measure the differential pressure across
the filter bag. A two-part epoxy finish is applied on the carbon steel vessels to maximize the life
of the housing; stainless steel vessels are supplied with a satin finish. Basket material is constructed
of 316 stainless steel with 9/64" perforations to act as a strainer or to accept a #1 or #2 size liquid bag.
Basket seals onto a Viton o-ring in the basket support. Adjustable tripod leg assembly is supplied with housing.
Vessels are rated at a 150 pounds per square inch design.
Sentinal Alarm
Most browsers already have the Adobe® Reader plugin to allow the reading of .pdf files.
If you browser does not, click
this link to download the free reader
Download our Sentinal Alarm .pdf document
here.
